How To Use A Car Jack Safely
Using a car jack safely is one of the most important skills for anyone who wants to change a tire, check brakes, or look under a vehicle. A jack can lift a car, but it is not designed to hold it up for long. Without the right preparation and support, a car can shift or fall and cause serious injury.
This guide explains how to use a car jack safely. It covers the basic types of jacks, the tools you need, how to prepare the vehicle, and a clear step-by-step process. It also looks at common mistakes.
Key Takeaways
- Always use jack stands before working under a car.
- Park on level, firm ground and set the parking brake.
- Lift only at the manufacturer’s marked jacking points.
- Never rely on a jack alone to hold the car up.
Always Use Jack Stands Before Working Under a Car
A jack lifts the vehicle, but jack stands hold it in place. Jack stands are rigid metal supports with a locking mechanism that give a stable base a jack cannot provide on its own.
Once the car is raised, place jack stands under solid support points and lower the car gently onto them. This keeps the vehicle from falling if the jack slips or loosens.
Park on Level, Firm Ground and Set the Parking Brake
A flat, hard surface such as concrete or packed asphalt is the safest choice. Soft soil, gravel, or a sloped driveway can cause the jack to tip or sink.
Set the parking brake before lifting to keep the car from rolling. Keep the transmission in park, or in first gear for a manual.
Lift Only at the Manufacturer’s Marked Jacking Points
Every vehicle has jacking points designed to take the weight of a lift. These are usually reinforced areas of the pinch weld or frame near each wheel.
Lifting at the wrong spot can bend body panels, damage the floor pan, or cause the car to slip off the jack. Check the owner’s manual to confirm the correct locations.
Never Rely on a Jack Alone to Hold the Car Up
A hydraulic jack can slowly lose pressure as seals wear or valves leak. A raised car can drop even when nothing seems wrong.
Never slide under a car supported only by a jack. Lower the vehicle onto jack stands before any work begins.
What a Car Jack Is and Why Safety Matters
A car jack lifts a vehicle off the ground by applying force to one part of the car at a time. Most people use one to change a flat tire or to reach parts underneath.
Lifting a car is a load-bearing task. A typical passenger vehicle weighs well over a thousand kilograms. Even a small mistake can cause that weight to shift quickly, so safe technique matters.
Common Types of Car Jacks
Several jack designs are common, and each works in a slightly different way. Knowing the basic types helps you pick the right tool for the job.
Most jacks use a hydraulic or mechanical system to lift the load. The main types differ in how they are operated and where they are used.
Floor Jacks, Scissor Jacks and Bottle Jacks Compared
A floor jack, sometimes called a trolley jack, has wheels and a long handle. It is stable and easy to position under a car, so many home garages use it for regular maintenance.
A scissor jack is the small, crank-operated jack usually stored in the trunk or under the spare tire. It is compact and suited to emergency roadside tire changes, but its small base and limited lift range make it unsuitable for long periods of work under a car.
A bottle jack is a compact hydraulic jack with a vertical ram. It can lift heavy loads with less effort, but its narrow base can be less stable on uneven surfaces. It is often used with a jack stand or support block placed beneath the lifted car.
In short, a floor jack suits regular garage work, a scissor jack fits emergency use, and a bottle jack handles heavier lifts when used with proper support.
Why Jacks Can Fail and Cause Injury
Jacks can fail for several reasons. Hydraulic seals may wear, fluid may leak, or the lifting arm may bend under excess load. A worn or damaged jack, or one used on the wrong surface, is more likely to slip.
A failed jack can let the vehicle drop suddenly, and crushed hands, feet or fingers are common injuries. Inspecting the jack before each use is a simple but important habit.
Tools and Equipment You Need Before You Start
Gather the right equipment before lifting a car. Having everything ready reduces the chance of rushing or improvising.
Jack Stands and Wheel Chocks
Jack stands are the most important support tool you can own. Use a pair rated for your vehicle’s weight. Wheel chocks are wedges placed against the tires to stop the car from rolling.
Check that the jack stands are in good condition and that their locking pins engage fully. Place chocks firmly against the tire on the side opposite the direction of movement.
Owner’s Manual and Jacking Point Locations
The owner’s manual shows the exact jacking points for your vehicle and lists any manufacturer instructions. Keep it nearby so you can confirm each location before lifting.
Gloves, Eye Protection and a Flashlight
Gloves protect your hands from sharp edges and grime. Safety glasses shield your eyes from debris that can fall while you work underneath. A flashlight helps you see the jacking points clearly.
Preparing the Vehicle and Work Area
Good preparation prevents most jacking accidents. Set up the area before lifting, since this routine makes each following step safer.
Finding a Level, Firm Surface
Choose a flat, hard surface such as a concrete garage floor. Avoid grass, dirt, gravel, and sloped driveways. Clear away loose stones and tools that could shift or interfere with the jack.
Setting the Parking Brake and Putting the Car in Gear or Park
Set the parking brake firmly before lifting. Place an automatic transmission in park, or a manual transmission in first or reverse gear. These steps help keep the vehicle from rolling while raised.
Chocking the Wheels That Stay on the Ground
Place wheel chocks against the tires that remain on the ground. If you lift the front, chock the rear wheels; if you lift the rear, chock the front wheels. This extra step adds stability.
Step-by-Step: How to Use a Car Jack Safely
Follow these steps in order, and finish each one before moving on. Rushing is one of the most common causes of jacking accidents.
Locating the Correct Jacking Point
Find the jacking point marked in the owner’s manual. Use a flashlight to confirm it. Look for the reinforced notch or flat area on the pinch weld near the wheel.
Positioning the Jack Under the Car
Place the jack directly beneath the jacking point. Make sure the saddle or lifting pad sits squarely on the point, and confirm the base is flat and stable. Keep your body clear of the car while positioning the jack.
Raising the Vehicle Slowly and Evenly
Pump the jack handle slowly and steadily, watching the jack and car as the lift begins. Raise the vehicle only as high as you need, and stop once the wheel clears the ground.
Placing Jack Stands at the Support Points
Position a jack stand under a solid support point near the jacking point. Set it flat and centered, raise it to the correct height, and lock it in place. Repeat on the other side if needed, and check that both stands are secure before going further.
Lowering the Car Back Down Safely
When the work is finished, raise the car slightly to take the weight off the stands. Remove the stands one at a time. Then lower the vehicle slowly using the jack release valve, keeping everyone clear of the wheel area.
Common Mistakes Beginners Make
Most jacking accidents come from a few repeated errors. Each one is easy to prevent with a little attention.
Working Under a Car Supported Only by a Jack
This is the most dangerous habit. A jack can lose pressure or slip without warning. Always place jack stands under the vehicle before getting underneath it.
Using the Wrong Lifting Point on the Frame or Body
Lifting at an unmarked spot can damage the body, exhaust, or fuel lines, and it can cause the car to slide off the jack. Stick to the manufacturer’s marked points every time.
Overloading a Jack or Ignoring Its Weight Rating
Every jack and jack stand has a rated load limit. Exceeding it raises the risk of failure. Check the rating label before use and confirm it covers your vehicle’s weight.
Tips for Working Safely Under a Raised Vehicle
Safe work depends on staying alert once the car is raised. Small habits help you spot problems early. These tips support the steps covered above.
Checking Stability Before Each Task
Before each task, give the car a gentle push at a safe distance. If it moves or rocks, lower it and reset the stands. Confirm the wheel chocks are still in place.
What to Do If the Vehicle Shifts or the Jack Slips
Move away from the car at once. Never try to catch or hold the vehicle with your hands. If you can do so safely, lower the car carefully, then check the jack and stands before trying again.
Frequently Asked Questions
Can I change a tire using only the jack that came with my car?
Yes, the factory jack is designed for roadside tire changes. Use it on the marked jacking point and on firm, level ground. Keep the car raised only as long as needed.
Do I always need jack stands to work under a car?
Yes, jack stands are needed any time you work under a car. A jack alone is not designed to hold the vehicle for extended periods. Place stands under solid support points before you slide underneath.
Where do I find the correct jacking points on my vehicle?
The owner’s manual lists the exact jacking points for your model. Many vehicles also have reinforced notches on the pinch weld near each wheel. Confirm the location with a flashlight before lifting.
How do I know if my car jack or jack stands are in good condition?
Look for cracks, bends, rust, or fluid leaks on the jack. Check that jack stand locking pins engage fully and that the rated load label is readable. Replace any equipment that shows damage.
Is it safe to use a jack on a slope or soft ground?
It is not safe. A slope or soft surface can cause the jack to tip or sink. Move the car to a level, firm surface before lifting.
Conclusion
Safe Car Jack Use Comes Down to Preparation and support
Safe car jack use depends on careful preparation and proper support. Work on level, firm ground, set the parking brake, and lift only at the marked jacking points. Always place jack stands under the vehicle before working underneath it. With these habits, lifting a car becomes a controlled, manageable task.

Peterson is an automotive safety enthusiast and product reviewer with a passion for helping drivers stay safe on the road. He researches and tests dash cams, backup cameras, TPMS systems, emergency tools, GPS trackers, and other vehicle safety products to provide honest, practical recommendations. Through CarSafeties.com, Peterson shares in-depth reviews, buying guides, and maintenance tips to help drivers make smarter and safer decisions.
